Home / Drags / Drags Rulespage 60

Drags Rules

 

520′ or 330′  E.T. Bracket Drags (cars will be split into 3 ET Brackets)

Children of all ages are allowed in the pits. Must be properly supervised at all times.

Driver Requirements:
-All drivers must have a valid driver’s license.
-Must wear a minimum of a DOT approved helmet at all times while racing. Snell SA rated motorsports helmet is highly recommended.
-Drivers must wear full pants (no shorts). SFI rated fire suit is highly recommended.
-Drivers must wear closed toe shoes. No sandals or flip flops (open toed shoes) allowed.

Vehicle Requirements:
Tires and Wheels:
All tires must be in good condition and free of cracks, cuts, or bulges. Wheels must have all lug nuts secured and without visible defects.
Throttle Return Springs:
All throttles must have dual throttle return springs. Unmodified factory throttle setups on late model vehicles are OK.
Seat Belts:
All vehicles are required to have seatbelts and drivers are required to wear seatbelts at all times while racing.
Batteries:
All batteries need to be securely mounted to vehicle. Factory holdowns are OK. No bungee cords, tape, wire or straps are allowed as a battery holdown device. When batteries are relocated into the trunk of the vehicle, the trunk must be separated from the driver’s compartment by a firewall and all openings must be sealed.
Brakes:
All vehicles must have fully working brakes.
Firewalls:
Full bodied vehicles and roadsters must have a firewall to separate the engine compartment from the driver’s compartment. All openings must be sealed.
Fluid Leaks:
All vehicles must be free of fluid leaks to prevent fluids contaminating the track surface. Vehicles that have visibly flowing leaks will be barred from competition until the leak has been fixed and cleaned up.
Fuel Lines:
Fuel Lines are to be metal or high pressure hose. Must be free of cracks and mounted away from moving parts, headers, and exhaust.
Liquid Overflow:
Overflow should be attached to the radiator vent to prevent coolant from leaking onto the track. The minimum size is 1 pint in size.
Nitrous Bottles:
All nitrous bottles must be securely fastened to the vehicle. Bottles mounted in the driver’s compartment must have a blow off valve vented to the outside of the driver’s compartment.

Cars Running 6.00 to 6.99 mandatory:
4 point cage/hoop- it can be welded in or bolted in, 3 point seatbelt/harness- Factory OEM seatbelts are okay. No lap belts. A 5 point harness is recommended, but not required.
Cars Running 6.00 to 6.99 recommended:
3 inch wheel studs, Drive line hoop, Fire jacket

Cars Running 5.99 or Faster:
4 point cage/hoop- it can be welded in or bolted in, 5 point harness, 3 inch wheel studs, Drive line hoop, Fire jacket.

Holden Follows His Father’s Footsteps, Plans 2015

He was crowned the champion at Evergreen Speedway as well as the NASCAR Whelen All-American Series Washington champion on the strength of his Speedway Chevrolet Super Late Model Division title run. “We were a new team last season,” said Holden. “We built a new car and went out there and won …

Read More »

Fitzpatrick Racing Preps for 2015 Season

Street Stock team looks to build on 2014 success. Chad Fitzpatrick will be back behind the wheel in the the Les Schwab Tires NASCAR Street Stock division entry. The team had numerous podium finishes and took the 3rd place spot in last year’s championship hunt.

Read More »

Showdown Winner Hayley Joins NASCAR Trucks

Congrats to 2014 Evergreen Speedway Summer Showdown winner Cameron Hayley on the announcement that he is joining championship team ThorSport Racing full-time in the NASCAR Camping World Truck Series (NCWTS) in 2015. From the Headlines: Hayley Ready For Trucking with ThorSport Racing Cameron Hayley ready for full-time truck ride Rookie …

Read More »

2015 Schedule Updated

We have tried very hard this year to accommodate other tracks in the area as well as certain traveling groups. We also tried to add some new exciting events…some worked out like the King of the Wing, and others fell through at the last second. With that we did make …

Read More »