Home / Drags / Drags Rulespage 10

Drags Rules

 

520′ or 330′  E.T. Bracket Drags (cars will be split into 3 ET Brackets)

Children of all ages are allowed in the pits. Must be properly supervised at all times.

Driver Requirements:
-All drivers must have a valid driver’s license.
-Must wear a minimum of a DOT approved helmet at all times while racing. Snell SA rated motorsports helmet is highly recommended.
-Drivers must wear full pants (no shorts). SFI rated fire suit is highly recommended.
-Drivers must wear closed toe shoes. No sandals or flip flops (open toed shoes) allowed.

Vehicle Requirements:
Tires and Wheels:
All tires must be in good condition and free of cracks, cuts, or bulges. Wheels must have all lug nuts secured and without visible defects.
Throttle Return Springs:
All throttles must have dual throttle return springs. Unmodified factory throttle setups on late model vehicles are OK.
Seat Belts:
All vehicles are required to have seatbelts and drivers are required to wear seatbelts at all times while racing.
Batteries:
All batteries need to be securely mounted to vehicle. Factory holdowns are OK. No bungee cords, tape, wire or straps are allowed as a battery holdown device. When batteries are relocated into the trunk of the vehicle, the trunk must be separated from the driver’s compartment by a firewall and all openings must be sealed.
Brakes:
All vehicles must have fully working brakes.
Firewalls:
Full bodied vehicles and roadsters must have a firewall to separate the engine compartment from the driver’s compartment. All openings must be sealed.
Fluid Leaks:
All vehicles must be free of fluid leaks to prevent fluids contaminating the track surface. Vehicles that have visibly flowing leaks will be barred from competition until the leak has been fixed and cleaned up.
Fuel Lines:
Fuel Lines are to be metal or high pressure hose. Must be free of cracks and mounted away from moving parts, headers, and exhaust.
Liquid Overflow:
Overflow should be attached to the radiator vent to prevent coolant from leaking onto the track. The minimum size is 1 pint in size.
Nitrous Bottles:
All nitrous bottles must be securely fastened to the vehicle. Bottles mounted in the driver’s compartment must have a blow off valve vented to the outside of the driver’s compartment.

Cars Running 6.00 to 6.99 mandatory:
4 point cage/hoop- it can be welded in or bolted in, 3 point seatbelt/harness- Factory OEM seatbelts are okay. No lap belts. A 5 point harness is recommended, but not required.
Cars Running 6.00 to 6.99 recommended:
3 inch wheel studs, Drive line hoop, Fire jacket

Cars Running 5.99 or Faster:
4 point cage/hoop- it can be welded in or bolted in, 5 point harness, 3 inch wheel studs, Drive line hoop, Fire jacket.

Big Field Gearing Up for Mark Galloway 150 At Evergreen Speedway

This weekend drivers from all over the West Coast will be heading to Evergreen Speedway as they take on the “Big Track” for the first time in 2017 with the 7th Annual Mark Galloway 150 on the 5/8 mile track. The entry list has grown full of some of the …

Read More »

Evergreen Motocross Opening Day!

We had our first official Evergreen Motocross Day yesterday! Here’s a few pictures shared by Bierek Moto Photos! Follow the Evergreen Motocross Facebook page for more details!

Read More »

May 21st AutoX Results!

RESULTS! / More pictures coming soon! It was a great day for AutoX! Watch for our June 18th event info to be released soon!

Read More »

PNW HOSTILE TAKEOVER #FDPro2 Podium Atlanta!

Congratulations to the PNW drivers who made the trip out to Road Atlanta and making it through qualifications Thursday! Awesome to see Evergreen drivers take take the Formula Drift Pro2 Atlanta podium NO HOLDS BARRED! 1st Place Travis Reeder 2nd Place Matt Vankirk 3rd Place Brody Goble More photos, videos, …

Read More »